An air duct is a hole that allows air to flow into an enclosed space. An air duct is also referred to as a ventilation shaft or air hole. For life to exist, there has to be an adequate supply of clean air.
People being organisms, require fresh air so that they can survive. Due to the above, it is very important for people to discover new and better ways of ensuring that there is improved air quality within their surroundings. The ventilation shaft present in most of our homes are one of the accomplishments achieved in helping maintain good air quality within our surroundings.
Overwhelmed by the Complexity of Cleaning? This May Help
Air ducts as used to provide clean oxygenated air into our places of residence and at the same time expel stuffy and contaminated air from our spaces. As air is delivered to a room through the duct, it carries with it dust particles, elements which if not removed in a timely manner might cause the inhabitants of a given space much harm.
For this reason, it is imperative that the air duct is cleaned up once in a while. Achieving this is quite simple. Tools required to facilitate this exercise include a vacuum cleaner, a couple of paper towels, screwdriver, toilet brush and a new furnace filter. Before any cleaning can proceed, all openings that provide heated air are first covered using the paper towels. This is very necessary since it ensures that dust does not enter the room during cleaning.
The fan should be switched on during this exercise. As one cleans, the big dust particles break into smaller units. By the aid of the fan, these particles are pushed outwards along the vent.
For greater efficiency, one is expected to clean the air duct without replacing the furnace filter first. This is because the filter helps prevent dust from reaching and stalling the fan. Hence it is always responsible for one to ensure that you are cleaning while the old furnace filter is still in place.
As one cleans, he should ensure that he thoroughly scrubs every surface using the toilet brush. This is to say that the individual cleaning should ensure that he has carefully cleaned all spaces within the shaft that might have a build up of dust in them. This includes the air registers which might also harbor some dust in them. After the all the dust particles have been loosened up, they are then sucked out of the shaft by use of a house vacuum cleaner. This the process leaves the ventilation shaft entirely clean.
Due to prolonged use, the furnace filter wears and tears. Because of this, the filter is not able to trap all the dust particles present in the air. Thus, is always important that the old furnace filter is replaced with a new furnace filter after every cleaning exercise.